Choose From the List of the Best Bed Frames and Get a Perfect Support for Your Mattress
Table Saws just as the name would suggest look like a table with a blade protruding from the center. Even though they are equipped with a circular saw blade, table saws are the best tools to make accurate, fine and angled cuts.
Some of the best table saw models are fitted with guardrails sets along one or both sides of the tool to make your cutting tasks quick, and easy. Circular saws are basically handheld tools that lack the accuracy and consistency of a table saw.
But on a brighter note are highly portable, and some of the best circular saws offer just as much cutting power as table saws. Buying the best table saw however can leave you spoilt for choice, given the myriad options to choose from.
But we’ve checked out several models in this segment, with a keen eye towards features and performance, and bring you the lowdown on 10 best table saws. We’ve also included a handy table saw buying guide to help you make the right investment.
Founded in 1924, SKILSAW Power Tools is known for inventing the world’s first portable circular saw, and today manufactures a wide range of professional power tools such as the SPT99T-01 8-1/4″ portable worm drive table saw.
Conceived in 1924, Worm Drive saws are designed to deliver superior torque throughout the power curve compared to direct drive saws. The original table saw by SKILSAW was equipped with a 10-inch blade, which still does a great job, and is highly portable.
The company however decided to tone down the size of the blade a couple of notches to increase the table size, without affecting the high level of portability it is known for. The smaller size of the blade however is not the only thing that’s changed in the SPT99T-01 8-1/4″ table saw, but it is also fitted with an improved rack and pinion fence system.
This all-new rack and pinion system allows you to make fence adjustments smoothly and quickly for accurate cuts. Speaking of portability, the SPT99T-01 8-1/4″ table saw measures 26 x 25 x 15 inches, and tips the scales at a little under 60 lbs, making it easy to move around the job site.
The SKILSAW SPT99T-01 8-1/4″ table saw is powered by a class-leading, patented dual-field motor, which is embedded with a unique copper system, generates less heat, and stays cool longer, so you can make the toughest cuts with ease.
The compact SPT99T-01 8-1/4″ table saw features a 2-5/8 inches depth of cut and 25 inches rip capacity, making it easy to slice up to three times into sheet goods. Further, it features a sturdy build with its 100 percent metal construction, so you can rest assured it will serve you well for many years to come.
Another neat feature of the SKILSAW SPT99T-01 8-1/4″ table saw is its onsite cord wrap, which allows you to tuck the cord away when not in use. It comes with everything you need to get started right out of the box including a carbide blade for rip cutting, rack and pinion fence, wrench, push stick, insert plate, and a 180 day STAY TRUE guarantee.
Rockwell Tools, conceived in 2005 is a company owned and operated by the Positec Tool Corporation – a well-respected name in the power and hand tool space. The Rockwell BladeRunner X2 is in a league of its own with its powerful performance, and appealing design.
It measures 16.1 x 17.5 x 8.3 inches, and weighs just 17 lbs, making it a joy to carry around the worksite with its built-in carry handle. Adding to this, it is fitted with an adjustable gauge that allows you to make precise miter cuts between 0-60°, making it a handy tool for a wide range of woodworking projects.
The BladeRunner X2 is truly a multifaceted table saw, in that you can use it to make a scroll, rip, miter, and inside cuts, without having to buy different saws separately. It comes with five assorted T-shank blades to cut through several different materials including ceramic tile, wood, metal, and aluminum.
Even though it showcases a compact footprint, the BladeRunner X2 table saw is fitted with a large rip fence, which along with the onsite splitter and hold-down guard offers wider cuts and greater control. The blades of the BladeRunner X2 saw can be replaced without using any additional tools and within a matter of seconds.
Further, it is compatible with any brand’s 4” T-shank blades and comes with a handy compartment located at the base of the unit to store extra blades, rip fence, and miter gauge when not in use. The BladeRunner X2 table saw by Rockwell is powered by a robust 5.5-amp motor that sprints at 3000/min RPM.
Further, it offers a ¾ depth of cut, can cut through the wood at up to 1-1/2”, 3/8” ceramic tile, 1-1/4” PVC pipe, 3/8” aluminum, and 1/8” steel. For anything over these numbers, you will have to invest in a permanently fixed table saw, which isn’t as portable as the BladeRunner X2.
The BladeRunner X2 table saw by Rockwell is fitted with a safety switch, which prevents accidental starting, and a vacuum port to connect to a shop vac for easy cleanup. It can be setup in just under 10 seconds, and is backed by a three-year warranty against any manufacturer defects.
3. DEWALT Table Saw for Jobsite
DeWalt requires no introduction, but quite briefly is billed as one of the largest power and hand tool manufacturers in the world. The DeWalt DWE7491RS jobsite table saw showcases a sleek footprint of 31 x 24.5 x 31 inches and 110 lbs, but has a lot going on under its hood, starting with a class leading 15-amp motor.
With the powerful motor along with a 10-inch 24-tooth super sharp carbide blade, the DeWalt DWE7491RS table saw can cut through myriad different materials with ease including larger shelving and trim materials.
It offers a 32-1/2-inch (82.5cm) rip capacity, which, and is factory fitted with a rack and pinion fence system for fast, accurate, and smooth adjustments. The DeWalt DWE7491RS table saw also comes with telescopic fence rails, which can be extended or retracted easily to create a small, portable footprint.
Adding to this extensive list of features is a flip over ripping fence to make narrow rip cuts, and a 2-1/2″ dust collection port that connects with any compatible vacuum for efficient dust extraction.
The DeWalt DWE7491RS table saw is an ideal choice for cabinet installers, hardwood floor installers, deck builders, remodelers, and can rip 4 feet X 8 feet sheet material, 2-inch X 12-inch framing lumber, and sizing material up to 3-inches thick.
It comes with a large 26-1/4-inch X 22-inch table, which provides excellent material support, and an integrated storage system for easy access to the push stick, and other components when not in use.
The DeWalt DWE7491RS jobsite table saw comes with a rolling stand complete with heavy duty wheels, so you can easily haul it around curbs, steps, and jobsite floors. In the box you get a table saw, 10-inch 24-tooth carbide blade, push stick, rolling stand, miter gauge, and a three-year manufacturer warranty card.
4. Rockwell RK7241S Table Saw with Laser
For a table saw that literally comes with all the bells and whistles, the Rockwell RK7241S is hard to beat. It may be a little heavy at a little over 88 lbs, but on a brighter note offers the best blend power, precision and portability, making it right for just about any cutting task in the shop.
The RK7241S table saw by Rockwell boasts 4x the cutting capacity of any saw in its segment, and is equipped with an extra long 30-inch fold out fence, which offers the widest rip capacity.
Another key features of the RK7241S table saw that sets it apart from its competition is its integrated laser guide, which realigns automatically if the blade angled is beveled, resulting in consistent accuracy. The extended leg of the table saw also serves as a pull handle to drag the RK7241S table saw on its onsite wheels across job sites.
With regards to rip capacity, Rockwell claims the RK7241S table saw offers the biggest depth of cut at 3-9/16-inches at 90 degrees and 2-9/16-inches at 45 degrees max. It allows you to cut through a 4 x 8 sheet of plywood in half in one fell swoop, owing to its 30-inch table.
The RK7241S table saw by Rockwell is backed by 15 amps of power, and boasts 4800 RPM no-load speed, making it a great choice for small to certain large scale projects. The Rockwell LaserGuide technology emits a true cutline exactly where the blade will cut, so there’s no guesswork when lining up cuts.
The Rockwell RK7241S table saw comes with a fully assembled trolley stand for top notch portability, and several different accessories including blade wrenches, dust bag, riving knife, push stick, miter gauge, and rip fence.
The stand and the Rockwell RK7241S table saw are easy to assemble, and can be done within a few minutes. simply, unfold the stand, secure the saw to the stand, and voila — you’re all set to make precision cuts through some seriously dense hardwood.
The RK7241S table saw by Rockwell comes with a two-year limited warranty to assure that your investment will last for several years on end.
5. Makita 2705X1 10-Inch Contractor Table Saw with Stand
Founded in 1915, and headquartered in Anjō, Japan, the Makita Corporation manufactures a wide range of power tools, and recorded annual sales of approximately $2.9 billion in 2012. The Makita 2705X1 is powered by high strength 15-amp motor that delivers a whopping 4800 RPM, so you can make most types of precision cuts with ease.
Further, it comes equipped with an electric brake, which greatly reduces the risk of injury to your fingers, and hands. Adding to this, the Makita 2705X1 table saw offers a large 3-5/8 inches at 90° and 2-1/2 inches at 45° cutting capacity, and can cut through a 4x material in a single pass.
Adding to this, the Makita 2705X1 table saw can accept a 3/16-inch dado blade, which allows you to cut grooves in wood for making joints such as tongue-and-grooves. Changing the blades of the Makita 2705X1 table saw is fairly easy, thanks to its integrated toolless blade guard system.
This blade guard system is equipped with two side guards that can be adjusted, making it easy to take measurements from the blade to the rip fence. But that’s not all, the Makita 2705X1 table saw is fitted with two anti-kickback pawls, which along with the riving knife provide full cuts.
The riving knife can be adjusted in a choice of three different positions without removing the throat plate, making it easy to make non-through, through, and dado cuts easily. With regards to cutting capacity and accuracy, the 2705X1 Makita table saw doesn’t disappoint with its precision machined table top for flat and accurate cuts.
The right extension table enhances the overall cutting capacity to easily cut 4′ x 8’ sheets of plywood. The onsite T-slot miter gauge measures 3/8×3/4-inches, and features grooves, which are engineered to provide great support for the cutting material for wide crosscutting tasks.
Adding to its list of features is its large on/off switch, and easy to read scale for quick adjustments. The rip fence of the Makita 2705X1 table saw can be moved easily across the table for precise adjustments.
This powerful table saw by Makita measures 24.6 x 22.4 x 28.6 inches, and weighs a hefty 145 lbs, but does come with wheels to move it around without breaking a sweat. It offers onboard storage space to store your accessories such as miter gauge, saw blade, wrench, push stick, rip fence, and comes with a thirty-day money back guarantee, and one-year warranty.
6. Milwaukee Electric Tools 2736-21HD Table Saw
The Milwaukee Electric Tool Corporation — founded in 1924 is an American esteemed brand in the power tool segment, and the 2736-21HD table saw is yet another bestselling addition to the company’s lineup.
Unlike other table saws in this list, the 2736-21HD table saw is powered by a POWERSTATE Brushless motor, which is engineered to deliver more deliver more application speed, torque, and durability. Adding to this, POWERSTATE motors reduce noise, cool faster, and offer years of maintenance free performance.
Further, it comes with the company’s patented Red-Link Plus Intelligence system, which is an integrated electronic system that enhances overall performance, while considerably reducing the chances of overheating the motor and batteries during heavy applications.
The Milwaukee 2736-21HD table saw is fitted with a REDLITHIUM HIGH OUTPUT HD12.0 battery, which offers 50 percent more cordless power, and runs 50 percent cooler than traditional power tool batteries. With regards to battery power, this table saw delivers 600 linear feet of cutting per charge.
Additionally, it boasts a 24-1/2″ rip capacity, allowing you to easily cut 4 x 8 sheets of plywood without any hiccups. The 2736-21HD table saw by Milwaukee Tools comes with a rack and pinion fence, which can be adjusted using a gear for precise square cuts.
The fence has clamps on either side, which can be secured with a pivoting extension to hold material beyond the table edge. You will need to calibrate the saw when it arrives to set the desired fence adjustments on both sides.
This table saw model by Milwaukee Tools features the ONE‑KEY collaborative tool and equipment platform that enhances its power, portability, and productivity. It features a standard release that swings the blade angle to the left for easy bevel adjustments, and comes with all-metal gearing for smooth blade height adjustment.
The 2736-21HD table saw by Milwaukee Tools is fitted with a riving knife, which can be adjusted with a release on the back of the tool. It comes with a choice of two riving knifes — with or without the blade guard, and a power loss safety switch, which prevents spinning of the blade when you first insert the battery.
7. Powermatic PM1000 Table Saw
Founded in 1921, Powermatic is a family owned and operated company that specializes in the manufacturing and marketing of professional power tool such as the PM1000 table saw. This tool arrives with a massive list of features, most notably its 13⁄4-horsepower motor that used just 115 volts of power.
It showcases an advanced throat plat design that’s complete with bullet catches along the side, which make it easy to lock it to a table. The motor of the Powermatic PM1000 table saw is protected by a swing away cover to prevent dust and damage. The generated dust from using the tool is directed through a funneled shroud, which empties itself into a hose.
The PM1000 table saw also comes fitted with an improved guard system, and an interchangeable, low-profile riving knife. Adding to this, the table saw is easy to turn on and off with its conveniently located power switch, and features an easy to use toolless guard assembly for unmatched safety.
The onsite miter gauge of the PM1000 table saw pivots 60 degrees on either side, making it easy to make the necessary adjustments for a wide range of cuts. Further, the Powermatic PM1000 table saw is equipped with 7” handwheels, which provide optimum momentum to make the desired blade height and bevel adjustments.
The PM1000 rests on a solid base, which is fitted with large cast adjustment wheels to move it around the shop floor. It measures 36.00 x 27.50 x 63.75 inches weighs 465 lbs, and comes with a poly-v belt, which is designed to reduce vibrations, and optimize motor efficiency.
It is built robust from high strength cast iron, and comes with an anti-kickback device, push stick, fence rail, riving knives, and much more. The heavy duty fence of the PM1000 table saw can be clamped down to enhance the overall performance of the tool.
The Accu-fence system is yet another notable feature of the PM1000 table saw, and is designed to provide better workspace, resulting in better accuracy. The PM1000 rings in with a higher price tag compared to its competition, but is definitely worth every penny, given its superior build quality, high performance features, and innovative design.
8. SKILSAW SPT99-11 10″ Heavy Duty Worm Drive Table Saw
Another hit from the SKILSAW hangar, the SPT99-11 table saw also features the revolutionary worm drive gearing system, which if you didn’t know offers a high level of torque for ripping applications.
The SPT99-11 table saw comes loaded with myriad tools right out of the box including a detachable dust port elbow, which also serves as a separator between the debris and sawdust for quick cleanup. in the box, you also get stand hands, which make it easy to handle the tool, but you can also replace them with aftermarket rubber handles.
It is equipped with a rack and pinion fence for quick and easy adjustments for accurate cuts, and offers a 3-5/8-inch depth of cut, and 30-1/2-inch rip capacity. Further, the SKILSAW SPT99-11 table saw is powered by an award worthy 15-amp Dual Field Motor, which stays cool during use, and allows the tool to cut through full sheets of plywood, and 4x material.
The SPT99-11 table saw measures 52.60 x 29.53 x 35.08 inches, weighs 94 lbs, and comes with a rugged stand complete with 16-inch wheels to easily move the tool around. It is a great choice for soft, hard and engineered woods, and for both ripping and crosscutting applications.
The outfeed and left support allow a single person to make larger cuts, whereas the T-rail miter gauge provides great accuracy during cuts. The SKILSAW SPT99-11 table saw also features an angle indicator and height adjustment, and an onsite blade lock that minimizes the risk of injury when changing the blade.
The side of the SKILSAW SPT99-11 table is fitted with a handy cord management system, which keeps the cord in place, and out of your way when storing or transporting the tool. If you’re going to be setting the SKILSAW SPT99-11 table saw on uneven surfaces, you can use the integrated leg adjustment to stabilize the base on the surface.
The stand can be lowered or raised using the onsite foot pedal, but it’s best to use the tool on a clean surface to prevent any scratches to the metal part that rests on the ground. The SKILSAW SPT99-11 table saw comes with a carbide blade, miter gauge, smart guard system including an anti-kickback device, push stick, insert plate, and one-year warranty.
9. CRAFTSMAN 20V MAX Table Saw
Owned by Stanley Black & Decker, Craftsman manufactures an array of lawn and garden equipment, tools, and work wear. The Craftsman 20V max table saw boasts a highly compact, lightweight and portable footprint at just 26.5 x 22.3 x 8.2 inches and 34 lbs.
This compact wet tile table saw is embedded with water fill lines for excellent water resistance, whether the tool is being used indoors or outdoors. It comes with an innovative sliding cart, which provides superior accuracy, and offers an extra large 17-inch cutting capacity.
The Craftsman 20V max table saw is equipped with a roll cage handle, which makes it easy to carry the tool wherever you go. it is powered by a lithium ion battery, so there’s no pesky wires or electric cords to deal with. In the box, you also get a lithium ion battery, blade wrench, battery charger, diamond blade, and a miter square.
10. Delta Power Tools 36-5100 Table Saw
Delta Power Tools provides some of the best woodworking tools in the industry, and the 36-5100 table saw is no different. It can be ordered in a choice two different variants — 30-inch rip capacity, and 52-inch rip capacity, each with less parts for quicker assembly.
The 36-5100 table saw by Delta Power Tools features a heavy duty one piece rail system, which allows you to make precision cuts each time you use the tool. Further, it comes with a large on/off switch that is easy to access, resulting in increased productivity.
The Delta Power Tools 36-5100 offers a 45 degree left blade tilt, a max depth of cut of 3.5 inches at 90 degrees, and 2.25 inches at 45 degrees. The table measures 20 inches wide and 27 inches deep, and offers a dado capacity of 13/16 in. X 8 inches.
The Delta Power Tools 36-5100 table saw comes with a dust port that can be connected with a 2-1/2″ dust port using a 4” adapter.
Table Saw Buying Guide
Table saws can be big ticket purchases, which is why you should consider the following factors to ensure you buy the right one for your needs. First thing to understand is that a table saw is a bit different that other type of saws, given that the blade is located in a fixed position, so you have to push the work material through it to make cuts.
A table saw however can make a variety of cuts including straight, long, rip cuts, miter and bevel cuts, and repeated cross cuts much more accurately than handheld circular saws.
Tables saws consists of a few standard components including:
Rip fence – a bar placed on the tool that serves as a guide for the workpiece as it works its way past the blade. This alone provides a great advantage compared to few other cutting tools such as a circular saw, but it is important to choose a rip fence that secures the workpiece well, so that you can make clean cuts.
Most table saws come factory equipped with a standard T-square fence, which provides great accuracy, and works well for average user. Some table saw models don’t come with a fence, but you can buy one separately to customize the tool for your needs.
When speaking about rip fences, another important aspect worth mentioning is the rip capacity, which should ideally be more than 24” for any jobsite table saw.
Bevel system – this system allows you to tilt the blade to make angled cuts.
Miter gauge – you can adjust this guide to move the workpiece across the blade when making cuts at specific angles. It features a locking mechanism that swivels between 40 degrees and 45 degrees, and then slides into a miter slot. You will have to adjust the miter gauge whether you want to make right-angled or compound cuts.
Riving knife – this component prevents the workpiece from pinching the blade, consequently reducing the risk of the workpieces falling back towards the operator.
Blade guard – this protects the operator from dust and debris, as well as accidental contact with the blade of the table saw.
Blade – perhaps the most important part of any table saw, the blade is available in several different types and specifications, which are defined by the number of teeth, arbor size, diameter, speed, and application. 10 inches is the standard blade diameter, and offers a 3-½” cut capacity at 90 degrees.
Table saw blades can be made from several different types of materials including carbon, carbide or diamond-tipped teeth, and some of these can cut other materials apart form wood.
Motor – table saws can come with one of two motor/drive combinations — direct-drive and belt drive, where the former connects directly with the blade, and transfers all power to it, and the latter come with a belt that transfers power to the blade.
Most, if not all portable table saws are fitted with direct-drive configuration, whereas belt-drive saws with induction motors are quieter, and a preferred choice for cutting denser material.
Types of table saws – there are several different types of table saws to choose from, most commonly portable (compact, jobsite, benchtop), and stationary (hybrid, contractor, cabinet). Portable table saws just as the name would suggest are fairly lightweight, and designed to be placed on a table.
Benchtop table saws are to be placed on a workbench or table, and are often lightweight, and an ideal choice for hobbyists, homeowners, and DIYers. Compact table saws are a bit larger than benchtop models, whereas jobsite table saws come mounted on a stand.
ON/off switch – all table saws come with a on/off switch, but what’s important is that the switch should be easy to access when using the tool. Most table saw power switches are larger than other buttons and switches, and are set where they can be accessed easily.
Amps – this represents the power output of the respective table saw, where the higher the number, the more power to make cuts.
Storage – the best table saws come with a storage compartment to store necessary tools and accessories such as rip fence, safety glasses, push stick, blades, and more.
Throat plate – when shopping for the best table saw, you may have heard the term throat plate crop up often. This removable piece sits flush with the blade, and prevents material from getting stuck between the blade and inside the arbor.
Dust chutes – this feature is often overlooked, but is important because it allows you to get rid of the nasty particles a table saw produces by connecting with a vacuum.
Table Saws FAQ’s
Q: Can you use an extension cord with a table saw?
A: Yes, you can use an extension cord with a table saw, but with caution! The extension cord you use should be free from any defects, and must be able to handle the amperage of your table saw. Using the wrong or a damaged extension cord could damage the motor of your table saw, so it is best to refer to the manufacturer user guide for best practices.
Q: What is the best electrical circuit for a table saw?
A: You should always try and use a dedicated electrical circuit for your table saw, ones that use a #12 or #14 copper wire with a 15 or 20 amp time delay fuse. Again, refer to your owner’s manual for best advice.
Q: My table saw keeps tripping due to overload, why?
A: This typically happen when there is no dedicated electrical circuit or if the blade binds up, resulting in motor overheating. You should always ensure that the blade is sharp, and not dull. If the blade is dull, be sure to replace it ASAP.
Q: Can you use dado blades with your table saw?
A: Yes, you can, but make sure that they are the right size for your table saw. Refer to your owner’s guide for compatible blades to use with your model table saw.
Q: How to maintain a table saw?
A: First things first — most table saws come factory lubricated including the bearings, so they don’t need additional lubrication unless it is mentioned in the user guide. Before you begin any maintenance task on your table saw, you should unplug it first if connected to an electrical outlet.
You can use any high quality automotive wax to polish the aw table, so that the workpieces slide smoothly across it when cutting. Since the blades are the most used part of the table saw, you will have to clean them periodically, preferably with a pitch and gum remover.
If the power cord is worn, cut or damages, do not attempt to use the table saw, but replace it ASAP by following the manufacturer instructions. The plastic parts of a table saw can be cleaned easily using a soft sponge and soapy water, but make sure they’re completely dry before re-installing them.
It is also good practice to check the blade of your table saw after every six or so hour of continuous operation. If you feel something isn’t right, then recalibrate the device according to your needs.
Table saws are a little bulkier than other types of cutting tools such as miter saws and jigsaws, but are a preferred tool when for making accurate cuts for a wide range of applications. The 10 table saws mentioned on this list are some of the best you can get in this segment, and offer a high level of performance for a plethora of different cutting tasks.
Disclosure: To keep our site running & free, we sometimes may receive a small commission if a reader decides to purchase via links on site, at no extra cost.
Our 2021 edition of the best table saws.